IRON KNIGHTS METAL WORKING

Lathes Q&a

More Lathesquestions please visit : MachineryFAQ.com

Please tender me a frank used electrical device tools dealer's address (Lathe, Milling hacksaw, drilling mechanism etc.)
in delhi/ahmedabad/mumbai or other place in india. http://www.google.co.in/search?hl=en&cli…

Plz abet me to find the fabric used contained by the creation of lathe device parts?
for example machine parts material tool post slide > made of > cost iron tail stock >made of > steel I search in google but no information Pretty much all of the mechanical components will be made out of type iron or machined steel....

Power Kraft wood lathe?
Bought a Power Kraft wood lathe model TPF 2020a. I know a little about lathe's but here is a pert missing on the head stock that has the taper and holds the chucks and bits. I don't know what this constituent is called and where I can find one? Sounds similar to the part could be...

Problem next to lathe speed control device?
I have a small 7x12 mini metalworking lathe with a unfixed speed motor. I found out that the speed control device inside needs to be replaced. I already tried to replace some of the components inside but that did not do anything. The speed control device has a number on the backbone that...

Question almost wood lathe?
Does anyone know when they say that the wood lathe had a 42 inch between centers it is certainly 42 inches or is it less. Becasuse I want to get a lathe and want to supply a 20 inch bed extension to make it 62 inches and I want to be sure that there is at...

Question for Machinist that operate Lathes. Machine 0.002" of the Dia of a coke Can?
Fact - a coke can's wall is 0.004" (0.1mm) thick How would you be able to contraption the coke can's wall so that the thickness is equal to 0.002" (0.05mm) thick? Remember that the rpm can affect the channel the can behaves in the lathe....

Question in the region of Wood Lathe?
I am looking to buy a wood lathe for my husband for his birthday, but I know nothing about them. I would similar to to get a normal size one but they are impressively expensive. Could anyone tell me what the largest item/items you can build with a mini lathe are and if...

Question on a lathe i hold?
i have a morgon metal lathe model cbl-940 and i have a bunch of make the addition of ons and chucks and stuff. i wa wondering if anyone could tell me around how much it was worth? gratefulness it means alot. i think it be manufactured in 1985 and the serial num is likee...

Question on lathe electrical device?
1. Factors/considerations affecting selection/application of turning parameters: a. Cutting speed (RPM) b. Depth of cut c. Feed rate "> is there a request for information here? There are guidelines for cutting most commerical metal alloys (and plastics and wood and ceramics, etc). Some of the factors are lubrication, coolant, toughness of the material, hardness of...

Removing plaster and lathe and found something unusual!?
Found three brooms in the wall with plaster on them. Was it adjectives to use brooms in the application of plaster and lathe? Keep looking you are liable to find adjectives kind of neat stuff out of sight in the walls, I hope if you have gone that far that you are...

Seaton Corp. is considering purchasing lathes from a supplier.?
Each lathe will cost $10,000 and generate after-tax cash flows of $1,200 for 10 years. At the end of 10 years the lathe have no value. Seaton's discount rate for the lathe is 14%. what is the NPV and IRR of this investment and how sholuld I evaluate whether the lathes...

Service Manual and parts List catalog Jet-1236p metal lathe?
Hi, I'm searching for Service Manual and parts List catalog Jet-1236p metal lathe swing over bed 12" swing over saddle 7 1/2" distance between center 36" hole through spindle 1 3/8 equipment and tools capacity -12"swing 36" centers Made contained by Tacoma Washington USA 1981,82,83,84,85.Not Sure ? Please Help Thank You...

Setting up a contrivance shop surrounded by Mumbai, Should I start rotten next to a Manual Lathe or a CNC gadget?
Me and my friend are planning to set up a Machine Shop in Mumbai. We dont have much conditions experience in the field but we are spur-of-the-moment learners.....but we are confused over one point. Some have advise us to...

Should I remove wallpaper from lathe and plaster previously drawing or can I paint over it?
I've been expecting to have to remove the deeply old paper in the past painting, but someone recently suggested that it would be too messy and I could get hold of away with leaving the wallpaper on. Am I going to hold problems with...

So what if nuns rap knuckles next to rulers? Didn't Jesus, a carpenter, lathe hand on ethnic group?
Thank you for that bit of wit...you made my day!! You remind me of a couple from China who came to an inn asking if they could return with a loom. The man at the desk said they had an iron but...

Stud finder that works on lathe and plaster walls?
Does anyone know of a brand/type of stud finder that works reliably on lathe and plaster walls? I have a cheap Stanley that I picked up at a local hardware store; it is completely useless. I don't want to spend money on something that is in recent times as useless. ...

TECHNICAL QUESTION Engineering Lathe.?
Hi, I wonder if there is anyone out there who have any knowledge of the small model GRAYSON Engineers lathe. My model was made probably delayed 40's. Yes, a collectors item but working ok. I am looking for anyone who might have or knows roughly speaking this model or similar lathes. Where I might buy spares...

The Carolina Furniture Company buys a lathe for $8000.?
It is expected that the lathe will last for 12 years, at which time it will have no expediency. If a straight-line method of depraciation is used, give an equation for the estimated value of the lathe as a function of time. For what values of t is your equation valid?...

To cut a 45 scope chamfer on the lathe what element of the foam must you move to a 45 level?
a carriage b tailstock c compound slide d cross slide The compound slide. But only if the chamfer is too big to do by purely plunge- cutting with a 45 deg. tool, or one swung to 45 deg. by...

Turning bowls on a lathe?
I would like to start turning bowls on a lathe. What do I need to grasp started? good chisels is probably the most important , along next to your different face plates and chucks...there are lots of dvd's on the subject and it is much better watching it than reading it contained by a book...i...

Twhat is the adjectives fults of lathe gadget ?
we get some defferent size after machining of steel bars a bout ( 0.05 mm ) pls assistance me to solve this case thanks "> Excessive play surrounded by your long travel slides. you should check and depending on the type of machine you own could possibly adjust the brass wear...

Value of Baldor Dental Lath

About the Author

MachineryFAQ.com

Lathe saddle and cross slide