Utility Wire
August 7th, 2008 / Author: admin |
No items matching your keywords were found.
how to wire a chicago 2000lb utility hoist?
Planetary gear system for fast, reliable pulling.
Automatic load-holding brake
Free spooling clutch
Power-in, power-out
1.5 HP, 12 volt heavy duty permanent magnetic motor
Remote control with 9ft. 9" cord
2000 lb. rated single line pull
50 ft. x 5/32'' air craft cable
Gear ratio: 153:1
Line speed: 10.5 ft. per minute @ 550 lbs, 7.5 ft. per minute @ 1000 lbs., 5.9 ft. per minute @ 1500 lbs., Mounting base dimensions: 5-1/2'' L x 4-1/8'' W, bolt pattern: 1.9" x 3"; Overall dimensions: 12.2'' L x 4.5'' W x 4.3'' H; Shipping weight: 16.2 lbs.
The hoist motor should have a connection box that allows cable entry. Your 12V cables should enter the weatherproof seal and connect to lugs in the connection box. Be sure to install sweat lugs on the battery cable for reliable connection.
The positive terminal should be marked with a small "+" or with red. The negative with black or "-" If there is no negative terminal, the case will provide the battery return.
You can also request installation manuals from the manufacturer. You mentioned Chicago. Do you mean Chicago Electric? That is a brand name of Harbor Freight. Their web site is below. In fact, I think I found the manual for your hoist/winch on the link below.
CHROME UTILITY STORAGE RACK INDUSTRIAL SHELF WIRE METAL
|
No items matching your keywords were found.